- #Dmr programming instructions how to
- #Dmr programming instructions update
- #Dmr programming instructions software
- #Dmr programming instructions code
- #Dmr programming instructions download
#Dmr programming instructions software
To this end, it aims at being a more universal codeplug programming software (CPS) compared to theĭevice and even revision specific CPSs provided by the manufacturers. Qdmr is a graphical user interface (GUI) application that allows to program several types of DMR radios. This radio can only have 1000 Contacts, I would have liked 10,000 at least.QDMR, a GUI application and command line tool to program DMR radios The only thing I would wish for is a larger Contacts capability. Even adding channels for other repeaters was not too difficult.
#Dmr programming instructions code
I found a Code Plug with seven DMR Repeaters and 10 TG's per Repeater, as well as quite a few VHF and UHF Repeaters. As of this post CHIRP does not support the TYT MD-9600. The Description of the radio by the Commercial seller indicated that CHIRP could be used to program the radio. The Microphone activation light works just fine and only when the PTT is pressed. Seventh The backlight of the Microphone is an adequate level such that I can see every button with no problem. BMP image but there is nothing that I can find that indicates this radio is capable of that. Sixth I'm not sure where Anonymous got the idea that the monochrome screen could accomodate a. Every channel in each list of every zone displays with no problems and works just fine.įifth While the Alert sounds are louder than audio received on any frequency, it is not so loud that I get a complaint from the XYL sitting on the other side of the room. A short press of P3 will cycle up through the zones and a long press of P3 will cycle the other direction. Third Programming all four buttons for both a short and long press was very easy and I have had no problems using either mode of any of the four buttons.įourth I have seven zones with no less than 20 channels in each of the two channel lists. Second My box did not contain a CD with software so I went straight to downloading the link from this Blog. Waste your money on something else.Īpparently in the past year and a half a lot has changed about this radio.įirst I had no issues with the cable right out of the box. So, I cannot strongly enought recommend staying away from this radio. I tried to reinstall the latest software twice, but no change. The microphone light is on ALL the time, even when the radio is powered on. The software told me it had to be in the right size and bitsize, but all was correct. I made it in the desired size and format, but there was no way to upload it. I tried to upload a BMP to the startup screen with no luck. I disabled tones for the buttons and the problem was gone. The sound is so loud it damages the hearing. A VERY loud "pop"/"Scratch" sound comes out of the loudspeker every time I press a button.
#Dmr programming instructions how to
(Maybe this is me not understanding how to use it, but I do not think so).įift. I have made a scan list, but when activating scan, it scans only the entire frequency band. The channels in the zones are not visible nowhere. The two in the middle just cannot be programmed, even if i do it through the software. When programmed, I noticed that of the four programmable buttons in the front, only P1 and P4 worked.
The supplied CD contained all possible TYT software for older models EXCEPT from MD-9600. I spent one day deleting and reconnecting and trying every possible way to make it work. This one however, has been a pain.įirs, none of my two computers would recognize the programming cable (normally detected after the radio is connected). I have a lot of Chinese radios of wich all work flawless. I wasted the entire weekend trying to make it work. The radio came with the latest software installed. I received a brand new TYT MD-9600 from a local ham radio shop before the weekend. With the firmware loader, at the links below:
Released an updated firmware version (3.28) and an updated version of TYT MD-9600 Upgrading the Programming Software Guide The data was being written successfully, but some or all channels were Of the TYT MD-9600 owners reported an issue loading channels into their The new version fixes a bug where theĭisplay would remain lit after the radio was powered off.
#Dmr programming instructions download
Please download the 3.29 firmware and refer to itĪnywhere 3.28 is mentioned below.
#Dmr programming instructions update
Update - Firmware version 3.29 has been released and the download link
0 kommentar(er)
